A friend of mine gave me these empty candle jars (Bath and Body Works) because she said I could find something to do with them. So I decided that they would be perfect little storage jars to use for bathroom storage, but of course I needed to add a touch of cuteness to them.
So below I added a supply list and free tutorial so you can join me. I used one mini charm pack (Strawberry Fields Revisited-Fig Tree and Co.) and let me tell you they were perfect and I was able to make 6 jar covers out of one mini charm pack, and I had no leftovers. Wouldn't these make perfect little gifts? Its never to early to start holiday gift making, or birthday gifts!
SUPPLY LIST
ruler or measuring tape
frixion pen (you will use this to mark your quilting lines)
scissors
thread
1/2" of velcro
batting
backing fabric
Mini Charm pack (7 mini charms for each jar cover)
1/4" foot
Walking foot
So...Let's get started
Step One
Take 7 mini charm squares from your mini charm pack and I glue baste before stitching so that I do not have to pin, but you can pin if that is your preference, if you do use the glue basting method then you will want to heat set with the iron before you stitch together using a 1/4" seam and regular 1/4" foot.
Press all seams to one side
Step Two
Cut a piece of backing fabric and batting at least 3"x14" (I used a piece of scrap batting and fabric)
Step 3
Sandwich mini charms, batting and backing fabric together
Spray baste in a well ventilated area
Step 4
Using your walking foot, stitch down top and bottom using a 1/4"seam
Mark where you want your quilting using the frixion pen, and quilt using the marked lines
Once you have finished your quilting, steam the piece and this will remove the marked lines.
Once you have quilted and steamed the piece, you can cut off all access fabric and batting.
Step 5
Now to make your own binding
Cut a strip of fabric measuring 2 1/2xWOF (you will have leftover, better to have more than less is how I roll.
press this piece in half lengthwise
press each side to the center which will make your binding strip
because it is a small project I do not attach my seam binding in the traditional sense,but after playing around with this it was the only way it worked for me.
I pinned my binding on one side first making sure to grab both sides of the binding with the pins.
Then I sewed to a 1/4" from the corner and carefully tucked my corners in making a mitered corner, I did this on both the front and back side and held in place and stitched around the corner. Turn the piece and continue until you get back to the beginning and cut the binding to length and turn edge under and attach, when you get to the end do not forget to
backstitch.
Step 6
Attach velcro using white glue- remember to attach one piece to the front side of the strip and one to the back side of the strip. Set aside and let dry.
Once the velcro is dry go ahead and put the wrap around the jar and attach the lid.
Little extras: I attached a glass knob to the jar lid 22using a heavy duty metal glue, you also
can add some flowers, ribbon or even buttons to the wrap itself for just the perfect finish.
And there you have it...I hope you enjoyed this tutorial
Have a Blessed Day
Memories to Treasures
No comments:
Post a Comment